Epson GT-6500 EN - Manual (Page 156)

ESC e Control option
Format: EXT*
Command: ASCII: ESC e
Decimal: 27 101
Hexadecimal: 1B 65
Parameter: i
Handshaking:
1 ESC e command
2 ACK code
3 Parameter i
4 ACK code
Parameter range:
i = 01
H
: Enable option
i = 00
H
: Disable option
Default value: 00
H
Explanation:
This command enables or disables the option.
Upon execution of this command, the ESC C (Set color) command is
reset to the default value (i=00
H
: Standard monochrome). The color
page sequence mode is not effective when the optional Automatic
Document Feeder in installed. To scan in color, be sure to set the
color line sequence or byte sequence mode with the ESC C command.
3-62 Command Reference