Epson GT-6500 EN - Manual (Page 186)

DIP Switch Setting
The GT-1000 has one bank of DIP switches on the control panel.
The tables below show the function of each switch and the preset
factory settings. The shaded boxes show the factory settings.
Switch No. Function ON OFF
SW 1 (Reserved) (Always ON) -
SW 2 Baud rate See table
SW 3
SW 4 Stop bit 1 bit 2 bits
SW 5 Gamma
correction See table
SW 6
SW 7 Halftoning
mode See table
SW 8
Baud rate settings
Setting SW 2 SW 3
19200 bps OFF OFF
9600 bps ON OFF
4800 bps OFF ON
2400 bps ON ON
B-4 Scanner Model Technical Data