Sealey VS8622 - Manual (Page 17)

8) Use UP/DOWN button to enter new pad thickness, and press Y
button to confirm.
If you want to quit the setting, press N button and a
“Command Cancelled!” message comes up.
9) An “Adaptation Done!” message comes up on device screen
indicating the setting is performed successfully.
If the setting is not carried out successfully, an “Adaptation
Failed!” message shows. Repeat steps above to try again.
10) Wait a few seconds or press any key to return.
11) Turn the ignition off.
4.2 Diagnose Mercedes SBC
The VS8622 is able to deactivate/activate SBC functions, change
brake fluid/bleed brake system, inspect brake air, read/clear SBC
trouble codes, and retrieve ECU information on Mercedes vehicles
that are equipped with SBC system.
1) Use UP/DOWN button to select SBC-Mercedes from
Diagnostic Menu and press Y button to confirm.
2) Wait a few seconds while the device is communicating with the
vehicle until following screen shows.
…… Diagnostic Menu …………… …
1/3
1) EPB-Audi A8
2) EPB-Other VAG
►3) SBC-Mercedes
..... Select Function
1/7
► 1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
VS8622_1.03_12/03/09
16