Fig 8, Fig 9. fig 10 – Sealey HBS97 User Manual
Page 3
When testing symmetrical low light beams the
projection on the plate will describe a perfect
horizontal line.
Correct projection on panel.
10. SYMMETRICAL LIGHTS
It is necessary to obtain a strong bright zone at the
centre of the plate, where the black spot is located.
fig 8.
!
!
11. INDEPENDENT HEADLIGHTS
fig 9.
fig 10.
9. DIPPED BEAM
12. 1. Indicator at BAD/GOOD limit:
Use for vehicles travelling under 30mph (40Km/h) and motorbikes.
12. 2. Indicator at the centre of GOOD:
Use for vehicles travelling over 30mph (40Km/h)
12. 3. Indicator on HALOGEN:
Use for vehicles with halogen or iodine headlights.
12. 4. CONTROL OF THE HEADLAMP LIGHT INTENSITY
a) Switch on the headlamp main beam. b) Read the intensity on the luxmeter.
12. THE LUXMETER
The “Luxmeter” is colour graduated for clear reading as follows:
HBS97.V2, HBS971 - 2 - 290806