Eicon Networks Diva 2440 - Manual (Page 82)

Command Line Reference Page 82
Profile Commands
PROFILE profileName
Changes the active context to the specified profile. If no name is specified, you are placed in
the General context. If you are in the Filter context and no name is specified, you are returned
to the profile you came from.
SHOW PROFILES
Valid context: General, Profile, Port
Displays the configuration settings for all profiles.
SET PROFILE NAME name
Valid context: PROFILE
Changes the name of the current profile.
ENABLE PROFILE
DISABLE PROFILE
Valid context: Profile
Enables/disables the current profile.
CONNECT
DISCONNECT
Valid context: Profile
Connects/disconnects the current profile. Use these commands so that changes to ATM or
ADSL settings take effect.
SET PROFILE TYPE IPoA | PPPoA | PPPoE
Valid context: Profile
Changes the connection type for the current profile. The options are:
profileName Name of an existing profile (ATM-1 or LAN for example).
name New name for the profile. The name must not contain spaces.
IPoA IP over ADSL
PPPoA PPP over ADSL
PPPoE PPP over Ethernet
IPoE IP over Ethernet (bridged ADSL)