Eicon Networks Diva 2440 - Manual (Page 72)

Command Line Reference Page 72
General Commands
HELP
Displays the commands available in the current context, with a short description of each
command's functionality.
SAVE
Saves the current configuration settings to the device's non-volatile memory. Save your
changes before powering off or resetting the hardware; otherwise, changes are lost.
EXIT
LOGOUT
Closes the current configuration session.
SET TIME hh:mm[:ss]
Sets the internal system clock.
SET DATE [yy]yy-mm-dd
Sets the internal system date in the format yyyy-mm-dd.
SHOW DATE
SHOW TIME
Displays the current system date and time. You can set the date with SET DATE and the time
with SET TIME.
SET PASSWORD
Sets the password users must specify when logging on to any of the configuration interfaces
(web, Telnet, etc.). Maximum of 10 alphanumeric characters, spaces are not allowed,
passwords are case-sensitive (‘PASS’ and ‘pass’ are not the same).
hh Hours Range: 00 to 24.
mm Minutes Range: 00 to 59.
ss Seconds Range: 00 to 59
mm Month Range: 01 to 12.
dd Day Range: 01 to 31.
yyyy Year Can be entered as two or four digits. A two-digit year
between 00 and 70 is assumed to be after 2000.
Examples: 00 is 2000, 55 is 2055, but 85 is 1985.