Find a waypoint – Eagle Electronics Cuda 240 S/GPS User Manual
Page 92
86
To delete a waypoint from the plotter:
1. Use the arrow keys to select the waypoint with the cursor.
2. Press
WPT
|
→ to
D
ELETE
|
ENT
|
← to
Y
ES
|
ENT
. To return to the previ-
ous page and clear the cursor, press
EXIT
.
To delete all waypoints at one time: press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
|
↓
to
D
ELETE
A
LL
M
Y
W
AYPOINTS
|
ENT
|
← to
Y
ES
|
ENT
. To return
to the previous page, press
EXIT|EXIT
.
Edit a Waypoint
Waypoint Name
To edit waypoint name: 1. Press
WPT
|
ENT
|
↓ to waypoint name|
ENT
|
→
to
E
DIT
N
AME
|
ENT
.
2. Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press
ENT
then
EXIT
|
EXIT
to return to the previous page display.
Waypoint Symbol
To edit waypoint symbol: 1. Press
WPT
|
ENT
|
↓ to waypoint
name|
ENT
|
→ to
E
DIT
S
YMBOL
|
ENT
.
2. Use arrow keys to select desired symbol and press
ENT
. To return to
the previous page, press
EXIT|EXIT
.
Waypoint Position
To edit waypoint position: 1. Press
WPT
|
ENT
|
↓ to waypoint
name|
ENT
|
→ to
E
DIT
P
OSITION
|
ENT
.
2. Latitude: press
↓ to
L
ATITUDE
|
ENT
. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lati-
tude is correct. Press
EXIT
.
3. Longitude: press
↓ to
L
ONGITUDE
|
ENT
. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lon-
gitude is correct. Press
EXIT
.
4. When latitude and longitude are correct, return to the previous page:
press
EXIT
|
EXIT
|
EXIT
.
Select a Waypoint
To select a waypoint on the plotter (for navigating to, for editing, etc.),
use the arrow keys and center the cursor over the waypoint. A high-
lighted halo will appear around the waypoint.
Find a Waypoint
To access a waypoint stored in your unit's memory, press the
WPT
key.
You'll see the Waypoint Menu, which offers these commands:
F
IND
B
Y
N
EAREST
,
F
IND
B
Y
N
AME
, and
C
REATE
N
EW
.