Eagle Electronics Cuda 240 S/GPS - Manual (Page 78)

72
Pages
The unit has four GPS Page displays that represent the four major oper-
ating modes. They are the Satellite Status Page, the Navigation Page,
Plotter Page and the Position Page. They are accessed by pressing
PAGES |
← to
GPS , then using
↑ or ↓ to select a Page. (Clear the Pages
Menu by pressing EXIT .)
Pages Menu, showing the GPS display options.
Sonar Pages
Like the GPS Page options, there are four Sonar Page displays. The
heart of the Sonar Page is the sonar chart, a view of the water column
from the surface to the bottom. The chart scrolls across the screen from
right to left, displaying signal echoes that represent fish, structure and
the bottom. The Sonar Pages are discussed in detail in Sec. 3. To get to
the Sonar Pages: Press
PAGES |
→ to
S
ONAR
|
↑ or ↓ to page|
ENT . (Clear
the Pages Menu by pressing EXIT .)
Satellite Status Page
The Satellite Status display, shown, provides detailed information on
the status of the unit's satellite lock-on and position acquisition. To get
to the Satellite Status Page: Press
PAGES |
← to
GPS |
↑ or ↓ to
S
ATEL-
LITES
| ENT . (Clear the Pages Menu by pressing EXIT .)
No matter what display option you are on, a flashing current position
indicator/question mark symbol and flashing GPS data displays indi-
cate that satellite lock has been lost and there is no position confirmed.
The Satellite Status display shows you the quality and accuracy of the
current satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!