Eagle Electronics Cuda 240 S/GPS - Manual (Page 59)

53
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
data list to highlight "Ground Speed."
When selected, a check mark appears beside the data type. (If you wish,
you may now use
↓ or ↑ to select other Data Types for display.)
Data list showing "Ground Speed" turned on to display on Sonar Page.
3. To return to the previous page, press EXIT | EXIT .
To turn off displayed data:
1. Press MENU |
↓ to
O
VERLAY
D
ATA
| ENT .
2. Press
↓ or ↑ to select Data Type, then press
ENT until the check mark
to the left of the selected data type disappears. (If you wish, you may
now use
↓ or ↑ to select other Data Types to turn off.)
3. To return to the previous page, press EXIT | EXIT .
To change displayed data font size:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. Press
↑ or ↓ to select Data Type. The
D ATA S IZE
(displayed in the bot-
tom of the Overlay Data Shown window) can be changed using
← or →.
When the size is right, press EXIT .