Eagle Electronics Cuda 250i - Manual (Page 43)

35
Front view (left) and side view (right) showing dimensions of the Cuda
250 when mounted on quick release bracket.
If you wish, you can fill in the hole around the cable with a good marine
sealant compound. (Some marine dealers stock cable hole covers to con-
ceal the opening.)
This unit uses a quick release-mounting bracket. When you run the
cable through the hole, make sure you allow enough slack for tilting the
unit and attaching the connector. (The snug fit of the push-on water-
proof connector requires some force to attach.) Also be sure there is
enough cable slack for rotation if you decide to use the optional GBSA-3
swivel base. The swivel base lets you rotate the sonar so it can be seen
from different parts of the boat.
Millimeter
[Inch]
12.09 [0.48]
76.9
[3.03]
156
[6.26]
70.3
[2.77]
107.5
[4.23]
82.7
[3.26]