Eagle Electronics Cuda 250i - Manual (Page 132)

124
Route Planning command on Main Menu (left). Routes menu (center);
Edit Route menu (right). Navigate Route command is selected.
2. Press
↓ to select route name|
ENT | ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT | ←
to Y
ES
| ENT .
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Fig. 1 shows the Navigation Page at the start of a route, heading
straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived
at Wpt 1; the arrival alarm has been triggered and the bearing arrow on
the compass rose has turned to point toward Wpt 2, off to the northeast.
Figure 2. Figure 1.