Eagle Electronics Cuda 250i - Manual (Page 102)

94
Navigation Page, recording a trail, traveling north. The page looks like
this when the unit is not navigating to a waypoint, following
a route, or backtracking a trail.
When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint and course are all shown digitally on this screen.
NOTE:
Remember: when Speed, Track and Position information displays
are flashing, satellite lock has not been acquired and no position fix
has been determined. A question mark will also flash on the pres-
ent position arrow in the center of the compass rose.
Speed is the velocity you are making over the ground. If you wanted,
you could customize the Speed window to display Closing Speed in-
stead. Closing Speed is also known as velocity made good.
Compass
rose
Navigation
information
displays
Present
position
arrow
Trail line
Track or compass heading indicator, showing direction of travel