Eagle Electronics Cuda 250i - Manual (Page 111)

103
Sequence for setting a waypoint. Step 1: while traveling,
quickly press
WPT
twice to call up Find Waypoint screen (seen in Step 2) and set a
point. Step 3: a message says the waypoint has been saved. Step 4: ve-
hicle continues on its way; number waypoint symbol is visible on map.
NOTE:
The Quick Save method uses the default waypoint symbol until you
edit an existing waypoint and change its symbol. (Edit Waypoint
Symbol is described in Sec. 7.) After you have changed a waypoint
symbol, the unit will remember the one you chose and use it the
next time you quick save a waypoint. To revert to the default sym-
bol, edit the waypoint or use the Reset Options.
Step 3. Step 4.
Step 1. Step 2.