Eagle Electronics Cuda 250i User Manual
Page 101
93
rently has. The smaller the position error number, the better (and more
accurate) the fix is. If the position error flashes dashes, then the unit
hasn't locked onto the satellites, and the number shown isn't valid.
The Satellite Status Page has its own menu, which is used for setting
various options. (Options and setup are discussed in Sec. 8.) To access
the Satellite Status Page Menu, from the Status Page, press
MENU
.
Navigation Page
This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page press
PAGES
|
← to
M
AP
|
↑
↓
to
N
AVIGATION
|
EXIT
.
The navigation screen looks like the one below when you are not navi-
gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history —path
you've just taken — is depicted by the line extending from the arrow.
The arrow pointing down at the top of the compass rose shows your cur-
rent track (direction of travel).