Eagle Electronics Cuda 250i - Manual (Page 131)

123
You can edit the route by adding and removing waypoints.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to route name|
ENT |
↓ to
R
OUTE
W
AYPOINTS
L
IST
. Use
↓ ↑ to se-
lect a waypoint, then press ENT .
Edit Route Waypoints menu with Add from Map selected (left) and
Remove Waypoint selected (right).
3. Use
↓ ↑ to select a command from the Edit Route Waypoints menu
and press ENT . Add From Map lets you insert a waypoint in the route
by clicking on a map location with the cursor. Add Waypoint calls up
the Waypoint List so you can insert a waypoint from the list. Remove
Waypoint will delete the selected waypoint from the route. View Way-
point will show you where the selected waypoint is on the map.
Navigate a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .