Eagle Electronics Cuda 250i User Manual
Page 136
128
character and repeat until the name is correct. Press
ENT.
To get back
to the main page display,
press
EXIT
repeatedly.
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT
|
ENT
|
ENT
|
↓ to waypoint name|
ENT
|
→
to
E
DIT
S
YM-
BOL
|
ENT
.
2. Use arrow keys to select desired symbol and press
ENT
. To return to
the previous page, press
EXIT
repeatedly.
Waypoint Position
To edit waypoint position:
1. Press
WPT
|
ENT
|
ENT
|
↓ to waypoint name|
ENT
|
→
to
E
DIT
P
OSI-
TION
|
ENT
.
2. Latitude: press
↓ to
L
ATITUDE
|
ENT
. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lati-
tude is correct. Press
EXIT
.
3. Longitude: press
↓ to
L
ONGITUDE
|
ENT
. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lon-
gitude is correct. Press
EXIT
.
4. When latitude and longitude are correct press
EXIT
repeatedly to re-
turn to the main page display.
Selecting a Waypoint
To select a waypoint on the map (for navigating, editing, etc.,) use the
arrow keys and center the cursor over the waypoint. A halo will appear
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after averaging
several position readings. This boosts waypoint position accuracy by
helping to eliminate errors caused by atmospheric conditions and other
factors.