Eagle Electronics Cuda 250i - Manual (Page 114)

106
cally shows the compass rose with its bearing arrow pointing toward
the man overboard position, and the destination name says "Going To
Man Overboard." The Map Page displays a Man Overboard waypoint,
represented by a human figure, and the steering arrow points where to
steer to reach that position.
Navigating to Man Overboard: Man Overboard activated (left), Naviga-
tion Page (center), and Map Page (right). The victim is astern of the
vessel. The GPS shows which direction to steer to for the rescue.
The man overboard position is also stored in the waypoint list for future
reference. It can be edited the same as any other waypoint.
To cancel navigation to MOB, press MENU | MENU |
↓ to
C ANCEL N AVIGA-
TION
| ENT |
← to
Y
ES
| ENT . The unit stops showing navigation information.
Navigate to Cursor Position on Map
The G
O
T
O
C
URSOR
command navigates to the current cursor position on
the map. It's a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor with the zoom in and zoom out keys to maneuver
around the map until you find a location you want to go to.
2. Center the cursor crosshairs over the location to select it. See the ex-
ample in the following figure. Many map items such as waypoints, ma-
rine NavAids, towns, etc. can be selected and appear highlighted with a