Eagle Electronics Cuda 250i - Manual (Page 159)

151
To access the Set Local Time menu, acquire your position, then press
MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
S ET L OCAL T IME
| ENT .
To set Local Time: Press ENT. Press ↑ ↓ to change the first character,
then press → to move the cursor to the next character. Repeat until the
time is correct and press ENT.
To set the Day: Press → to D AY
| ENT. Use ↑ ↓ to select the day and
press ENT.
To set the Month: Press ↓ and ← to M ONTH
| ENT. Use ↑ ↓ to select the
month and press ENT.
To set the Year: Press → to Y EAR
| ENT. Press ↑ ↓ to select the year and
press ENT.
To set Time Format: Press
↓ to
T
IME
F
ORMAT
| ENT . Use
↑ ↓ to select the
desired Time Format and press ENT .
To set Date Format: Press
↓ to
D ATE F ORMAT
| ENT . Use
↑ ↓ to select the
desired Date Format and press ENT .
In the center of the local time menu is C
ONFIG
DST . It allows your unit to
automatically make the adjustment for Daylight Savings. You may se-
lect which set of rules matches DST in your region or accept the de-
fault. Once you are satisfied with the time settings, press
EXIT repeat-
edly to get back to the main page display.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of a position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it is not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm going off repeatedly. If you want, you can
turn off the WAAS Acquired/Lost alarm without affecting how the unit
uses WAAS.