Emerson Radio CKW2000 - Manual (Page 35)

34
Select Siren Volume
You can select between a High or Low volume siren level.
• With the radio ‘off’, press the MENU button,
then press the or Navigation buttons
until the display shows “ALERT VOLUME”
and the current setting.
Press the SELECT button and the current
setting starts flashing.
• Press the or Navigation buttons to switch
between the High and Low siren levels. You
will hear two ‘beeps’ at either High or Low
volume to confirm your selection, and the “HI”
or “LO” indicator will remain in the bottom of
the display.
NOTE: This adjustment only applies to the Siren Alert. The level of the Voice
Alert is adjusted by the radio VOLUME control.
CKW2000_041207.p65 12/4/2007, 11:56 34