Emerson Radio CKW2000 - Manual (Page 31)

30
NOTES:
• If you selected “MULTIPLE” in Step 4 above, after you have entered all 6
digits of the first SAME#, the CODE “01” indicator begins flashing again.
Press the Navigation button to advance the CODE number to “02” and
then enter the second SAME# as described above.
The MULTIPLE COUNTY indicator will
remain in the display.
• If you selected “ALL” in Step 4 above you will not be asked to enter any
SAME#. Your radio will be activated by every alert signal broadcast by the
NWR transmitter serving your area.
The ALL COUNTY indicator will remain in
the display.
Once your radio is programmed with the SAME# for your specific county, it will
only be activated by alert signals that apply to that specific county.
Other Settings and Adjustments
After you have selected the weather channel (1 –7) for your area and entered the
correct SAME county code or codes, there are a few other adjustments that you
can make to customize the operation of your CKW2000.
CKW2000_041207.p65 12/4/2007, 11:56 30