Epson 1440 User Manual
Page 71
Section 9: Management and Configuration
AXIS 1440 User’s Manual
61
A summary of the services available from the AXIS 1440 Home Page
follows:
Click the Configuration link to do the following:
•
Change configuration parameters, including the node address and
root password. You’ll find a complete list of these parameters in
Appendix B - The Parameter List.
•
Enable or disable available networking protocols, or modify their
operation.
Note:
❏ When you click either Management or Configuration for the first
time, you are asked to provide a user name and password. By
default these are set to
root
and
pass
, respectively.
Caution!
❏ Make sure you consult the network administrator before you
make any changes to the network configuration.
You can reset parameter settings to the factory default values from the
Management page. You can also view basic information about the
AXIS 1440, such as the current software version, Ethernet address,
serial number, base URL address, and enabled networking protocols.
Click the Status link to view detailed status of the connected printer
ports (for example, number of bytes printed for each print job).
The Account page displays an historical record of print jobs that
includes the user, protocol, file size, elapsed time and off-line time.