Epson 1440 User Manual

Page 39

Section 3: Installing and Configuring the Print Server

AXIS 1440 User’s Manual

Using BOOTP in UNIX

Follow these steps to set the Internet address using BOOTP:

1. Append the following entry to your boot table. This is typically

performed by editing the file:

/etc/bootptab

Example:

Notes:

❏ Enter the

and

fields exactly as shown.

❏ The

field is the Ethernet address and the

field is the Internet

address of your AXIS 1440.

❏ The

and

fields correspond to the default router address and

subnet mask (

DEF_ROUT

and

NET_MASK

2. If necessary, update your host table and alias name databases as

required by your system.

3. If it is not already running, start the BOOTP daemon. This is

typically performed using the

bootpd

command.

4. Restart the AXIS 1440 to download the Internet address, default

router address and subnet mask.

The AXIS 1440 can automatically download a customized config file
from a TFTP server. Just add the name of the config file and the
Internet address of the TFTP server to your boot table. The config file
is downloaded immediately after the AXIS 1440 receives its Internet
address.

:ht=:vm=:\

:ha=:ip=:\

:sm=:gw=

npsname:ht=ether:vm=rfc1048:\

:ha=00408c100086:ip=192.168.3.191:\

:sm=255.255.255.0:gw=192.168.1.1