Epson 1440 - Manual (Page 28)

Section 3: Installing and Configuring the Print Server
18 AXIS 1440 User’s Manual
Software Installation
AXIS Utilities disks 1 and 2 contain the following:
• AXIS NetPilot
• AXIS Print Utility for Windows
• AXIS Print Monitor
• AXIS Print Utility for OS/2
• AXIS MIB (Management Information Base)
• axinstall (UNIX)
Installing software for
Windows 95/98, and
Windows NT
Before you begin this procedure, make sure you’ve installed your
EPSON printer software and closed all applications.
Follow these steps to install the Axis software:
1. With Windows running, insert the AXIS Utilities disk 1 in your
diskette drive.
2. Select Run from the Start menu, then type a:\windows\setup
(where a is the letter of your diskette drive). Click OK.
3. Follow the instructions on screen. Choose Custom if you want to
install both AXIS NetPilot and AXIS Print Monitor; leave Typical
selected if you only want to install AXIS Print Monitor.
4. When you see a message that the software has successfully
installed, click Close.
Note: ❏ If the Installing AXIS Printer Ports wizard appears on your screen,
close it. Do not try to install your printer this way.
5. Restart your system.