About axis print utility for os/2, Install the axis 1440 – Epson 1440 User Manual

Page 60

Section 7: Setting Up OS/2 Workstations

AXIS 1440 User’s Manual

About AXIS Print

Utility for OS/2

AXIS Print Utility for OS/2 does the following:

•

Installs and maintains the AXIS 1440 printer port as an OS/2
printer port.

•

Captures and monitors print jobs directed to the AXIS 1440 port,
and notifies you of problems. Print jobs may be directed through
a spool directory either at your local hard disk, or at the file server.

Note:

❏ The NetBEUI protocol must be active. If not, use MPTS/LAPS

(LAN Server) to activate it.

Install the AXIS 1440

1. With AXIS Print Utility for OS/2 running, click Install to install

your AXIS 1440. The print server appears in the list as
.LP1, where is AX followed by the last six digits
of your print server number (for example, AX100086.LP1). You
can use AXIS NetPilot to change this default name.

2. Select the port that you want to install, then click Install.

Repeat this procedure for each server using the AXIS 1440.

Note:

❏ AXIS Print Utility for OS/2 must be running on the server

whenever clients print to the AXIS 1440.