Enterasys Networks Fast Network 10 User Manual
Page 70
Chapter 4: Monitoring and Managing Your FN10
Page 4-10
Fast Network 10 User Guide
If you do not want to view the status of each Ethernet port, use the
Ctrl-C keys to return to the LCM prompt.
If you do not want to view the status of port 2, use the Ctrl-C keys to
return to the LCM prompt.
You can view the status for multiple of ports by typing
status
and
indicating the range of port numbers, for example
status 2-6
.
Software Currently Running: TigerSwitch software, Tue 08/23/94 15:03:09
Next Bootstrap (1st bank): TigerSwitch software Tue 08/23/94 15:03:09
Power-up test failures: none
Current unit temperature is normal.
System Up Time: 2:25:57
Current Number of Learned Addresses: 133
Number of Defined Filters: 0
CPU utilization is light.
Port
RX Packets
TX Packets
Collisions
Erred Packets
1
2
3
4
0
6978
0
0
1676
8
0
0
1676
0
0
0
0
0
0
0
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
24
0
0
0
0
Type
Port 1 Status
Bridging:
Enabled/Disabled:
Spanning Tree:
Pkts Transmitted:
Pkts Received:
Carrier Losses:
Total Collisions:
Excess Collisions:
RX Missed Pkts:
RX Runt Pkts:
RX FCS/Align Errs:
Internal TX Errs:
Transparent Bridging
Enabled, Rip listening
Forwarding
1693
0
1693
0
0
0
0
0
0
Type
Trunking State:
Off