Enterasys Networks Fast Network 10 - Manual (Page 14)

Chapter 1: Introduction
Page 1-4 Fast Network 10 User Guide
1.4 RELATED DOCUMENTATION
The following documentation may assist the user in using this product:
• Fast Network 10 MIB Reference Guide – contains enterprise MIB
information.
• Interconnections, Bridges and Routers, Radia Perlman, Addison
Wesley © 1992.
• Internetworking with TCP/IP: Principles, Protocols, and Architecture
(2nd edition), Volumes I and II, Douglas Comer, Prentice Hall © 1991.
• The Simple Book, An Introduction to Management of TCP/IP-based
internets
, Marshall T. Rose, Prentice Hall © Second Edition, 1994.
1.5 OVERVIEW
The FN10 is an intelligent Ethernet-to-Ethernet switch that is available in
the following configuration options:
• 12 port - 12 IEEE 802.3 10BASE-T Ethernet ports, including one
Ethernet Attachment Unit Interface (AUI) connection.
• 12 port with FE up-link option - 2 Fast Ethernet ports (100 Mbps)
and 12 IEEE 802.3 10BASE-T Ethernet ports (10 Mbps), including
one Ethernet Attachment Unit Interface (AUI) connection.
• 24 port - 24 IEEE 802.3 10BASE-T Ethernet ports, including one
Ethernet Attachment Unit Interface (AUI) connection.
• 24 port with FE up-link option - 2 Fast Ethernet ports (100 Mbps),
and 24 IEEE 802.3 10BASE-T Ethernet ports (10 Mbps), including
one Ethernet Attachment Unit Interface (AUI) connection.
In addition, each FN10 configuration includes an RS232C port for
out-of-band management.
The following figures show the different front panels for the 12 and 24
port FN10 configurations, and the rear panel for the optional 2 Fast
Ethernet ports.