1 displaying status – Enterasys Networks Fast Network 10 User Manual
Page 69

Using LCM to Check FN10 Status
Fast Network 10 User Guide
Page 4-9
•
Address display
•
Ipaddr
•
Ident
These LCM commands are described in the sections that follow.
4.3.1 Displaying Status
The
status
command displays the status of the FN10 and automatically
pages through the status of all of the Ethernet ports, pausing at each
screen of information.
At the LCM prompt:
1. Type
status
LCM displays the following type of information.
NOTE
You can also use the
status
command to display status for
individual Ethernet ports by typing
status
and specifying a port
number.