Powerplus POWXQ5360 TABLE SAW 1800W 254MM EN - Manual (Page 3)

POWXQ5360 EN
Copyright © 2010 VARO P a g e | 3 www.varo.com
TABLE SAW 1800W
POWXQ5360
1 APPLICATION
The power tool is intended as a stationary machine for making straight lengthways and
crossways cuts in wood. Horizontal miter angles as well as vertical bevel angles are possible.
The machine is designed with sufficient capacity for sawing hard and softwood as well as
press and particle board.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. ON/OFF switch
2. Bevel angle pointer and scale
3. Blade bevel lock knob
4. Sliding miter table locking lever
5. Sliding miter table
6. Miter gauge
7. Table insert
8. Blade guard
9. Rip fence
10. Auxiliary rip fence
11. Side table extension 12. Cord wrap
13. Rear table extension
14. Splitter
15. Blade
16. Blade storage
17. Rip fence storage
18. Push stick storage
19. Mounting hole
20. Push stick
21. Miter gauge storage
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packing and package inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Table saw 1800W
1 x Rear extension table
1 x Right table extension
1 x Rip fence
1 x Auxiliary rip fence (aluminum)
1 x Blade guard and splitter 1 x Miter gauge
2 x Blade wrenches
1 x Push stick
1 x Blade 254x30x2.8mm, 40T
1 x User’s manual
1 x Small XQ catalogue
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used: