On/off paddle switch (fig 16, fig 17), Raising, Tilting – Powerplus POWXQ5360 TABLE SAW 1800W 254MM EN User Manual

Page 13: Switching on

Text mode
Original mode

POWXQ5360

P a g e

| 13

www.varo.com

9.1

Raising and tilting the blade (fig 15)

Fig 15

9.1.1

Raising

Turn the blade raising control handle (b) CLOCKWISE in order to raise the blade.

It is not necessary to loosen the blade tilting locking knob (a) when raising
or lowering the saw blade.

9.1.2

Tilting

 Loosen the blade bevel locking knob (a).
 Slide the entire control handle assembly (c) to the desired location.
 Tighten the blade bevel locking knob (a). Verify that the locking knob is fully tightened

before attempting a cut.

9.2

ON/OFF paddle switch (fig 16, fig 17)

Fig 16

Fig 17

9.2.1

Switching On

 Push the red EMERGENCY OFF button (a) upward and open the yellow safety flap (b).
 To start the operation, press the green I-push button (c).
 Afterwards, close the safety flap (b) without engaging it.