Powerplus POWX0761 FLIPOVER 1400W 216MM EN - Manual

POWX0761
EN
Copyright © 2008 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................ 4
2 DESCRIPTION ................................................................................ 4
3 PACKAGE CONTENT LIST ............................................................ 5
4 SYMBOLS ....................................................................................... 5
5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 6
5.1 Work area ............................................................................................................... 6
5.2 Electrical safety ..................................................................................................... 6
5.3 Personal safety ...................................................................................................... 6
5.4 Power tool use and care ........................................................................................ 7
5.5 Service .................................................................................................................... 7
6 ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS ...... 7
6.1 For both Mitre saw mode and table saw (bench saw) mode: .............................. 7
6.2 When using in Mitre saw mode: ............................................................................ 8
6.3 When using in the table saw (bench saw) mode: ................................................ 9
7 INSTALLATION .............................................................................. 9
7.1 Bench mounting (Fig. 1 & 3) ................................................................................. 9
7.1.1 For the fully-extended feet set up as the high table. ................................................. 9
7.1.2 For the folded feet set up as the low table ................................................................ 9
8 FUNCTIONAL DESCRIPTION ...................................................... 10
8.1 Blade guard (Fig. 4, 5 & 6) ................................................................................... 10
8.2 Maintaining maximum cutting capacity (Fig. 7) ................................................. 11
8.3 Adjusting the Mitre angle (Fig. 9 & 10) ............................................................... 11
8.4 Adjusting the bevel angle (Fig. 11 & 12) ............................................................. 11
8.4.1 In the Mitre saw mode............................................................................................ 11
8.4.2 In the table saw mode (Fig. 13) .............................................................................. 11
8.5 Switch action (Fig. 14) ......................................................................................... 12
8.5.1 Switch for the Mitre saw mode (A) ......................................................................... 12
8.5.2 Switch for the table saw mode (B) .......................................................................... 12
8.6 Adjusting the depth of cut (Fig. 15 - 21) ............................................................. 12
9 ASSEMBLY ................................................................................... 12
9.1 Socket wrench storage (Fig. 17) ......................................................................... 12