Powerplus POWXQ5360 TABLE SAW 1800W 254MM EN - Manual (Page 18)

POWXQ5360 EN
Copyright © 2010 VARO P a g e | 18 www.varo.com
9.10 Compound miter crosscutting 0° - 45° blade bevel & 0° - 45° miter angle (fig 26)
This sawing operation combines a miter angle with a bevel angle.
Fig 26
 Set the miter gauge to the
desired angle.
 Set the blade bevel to the
desired bevel angle, and tighten
the blade bevel locking knob.
 Hold the work piece firmly
against the face of the miter
gauge throughout the cutting
operation.
9.11 Mitering: 0° - 45° miter angle (fig 27)
This operation is the same as crosscutting, except that the miter gauge is locked at an angle
other than 90°.
Fig 27
 Set the blade to a 0° bevel angle,
and tighten the blade bevel
locking knob.
 Set the miter gauge to the desired
miter angle, and secure it in
position by tightening the miter
gauge locking handle.
 Hold the work piece firmly against
the face of the miter gauge
throughout the cutting operation.
10 TECHNICAL DATA
Mains supply 230-240 V ~ 50 Hz
Rated input 1800W S6
No load speed 4500min-1
Tilting range 0-45°
Max. cutting depth
90° 80mm
45° 55mm
Table size 645x530mm
Table size with extensions 850x860mm
Connection cable 2m
Blade 254x30x2.8mm, 40T
Safety class II / double insulated