Ella Moss Automobile Parts - Manual (Page 13)

M:\Product Information\366-348\Instructions\366-348 MGB Fuel Injection Installation Instructions_Grant_2.doc
366-348 Inst Fig 25
25.1
25.2 25.2
70. Locate the branch of the harness that has the relay
(25.1) and the inline fuse holders (25.2), and route it
over to the right hand side of the engine compartment.
Although missing in this particular picture, we encourage
the use of fender covers or towels to protect the paint.
71. Locate the branch of the harness with the molded plastic
connectors and carefully route it over toward the throttle
body. Take your time, and run the harness under the
heater hoses, behind vacuum lines and the stock wiring
harness bundle.
72. There will be a bundle of red-white wire hanging down
near the back of the engine. (see Fig 25C) This will
provide power for the new fuel pump and we will deal
with it when we run the fuel return hose.
366-348 Inst Fig 25C
This completes part 5 of the installation.
Page 13 of 52