Epson Stylus TX100 - Manual (Page 65)

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Removing the Circuit Boards 65
Confidential
„ Buttons
1. Remove the Button Power and the Button OP from the Panel Cover.
2. Remove the LED Lens from the Panel Cover.
Figure 4-19. Removing the Buttons
4.4.2 Main Board
† Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire ( p 60 ), Scanner Unit ( p 62 ), Middle Housing ( p 63 )
Panel Unit ( p 64 ), Hopper ( p 72 )
† Removal procedure
1. Remove all the cables and FFCs connected to the Main Board.
Figure 4-20. Removing the Main Board (1)
„ When installing the Panel Board, align the positioning hole of
the Panel Board with the dowels of the Panel Cover. (See
Fig.4-18 )
„ When installing the Panel Unit, align the positioning holes of the
Middle Housing with the dowels of the Panel Cover, then secure
them with four hooks. (See
Fig.4-16 , Fig.4-19 .)
Button Power Button OP LED Lens
Panel Cover Dowel
CN No Cable Cable Color
Connector
Color
Pins
J2 Panel FFC --- Black 10
J3 Power Supply Unit cable Gray Brown 3
J4 Scanner FFC --- Black 12
J5 Scanner Motor Cable Black,Brown,
Orenge,Yellow
White 4
J6 PF Motor Cable Red,
Black
White 2
J7 CR Motor Cable Gray,
Black
Brown 2
J8 Head FFC --- Black 21
J9 FFC --- Black 17
Main Board
J3 J6 J7
J2 J4 J5 J8 J9