7 stand-alone copy function, 1 supported paper and copy mode, 2 setting for stand-alone copy – Epson Stylus TX100 User Manual
Page 21

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Revision A
PRODUCT DESCRIPTION
Stand-alone Copy Function
21
Confidential
1.7 Stand-alone Copy Function
1.7.1 Supported Paper and Copy Mode
1.7.2 Setting for Stand-alone Copy
You can make settings by a specific key operation to select color copy, B&W copy, or
photo copy. Refer to
for key operation methods.
1.7.2.1 Relation Between Original and Copy
The scanning start position is located on the front right of the scan bed. The relations
between the original placed face down and its copy are as follows.
Figure 1-6. Relation Between Original and Copy (Borderless/With Borders)
Table 1-18. Supported Paper and Copy Mode
Paper Type
Size
Quality
Resolu-
tion
Dot
Size
Bi-D
Micro
Weave
Border-
less
Plain paper
A4,
Letter
Draft
360x120
Eco
ON
OFF
NA
Standard
360x360
VSD1
ON
OFF
NA
Photo Paper
4” x 6”
Standard
1440x720 VSD3
ON
ON
OK
Table 1-19. Settings for Stand--alone Copy
Settings
Function
Copy type
Select from color copy, B&W copy or photo copy by a key operation.
Layout
• Color Copy, B&W Copy
Normal layout with 3mm margins
• Photo Copy
Borderless (The area size of projections: Fixed to Maximum.)
Print
setting
Paper type
Refer to
.
Paper size
Quality
Fit to Page
When “Fit to Page” is selected by the key operation, a copy is made
adjusting the image size to the paper by enlarging/reducing the
original. The zoom ratio is determined as follows, and the same ratio is
applied to both horizontal and vertical sides.
• Detects the image size of the original using the preview function.
• Calculates an appropriate zoom ratio from the image size and the
printable area of the paper.
• If the ratio falls into less than 25%, 25% is applied. 400% is applied
if over 400% likewise.
• For color/B&W copying, the zoom ratio is determined so as to
make a copy of the whole image of the original on the paper.
• For photo copying, the zoom ratio is determined so as not to leave
any margins on the paper.
Original Document
A
Scan bed
---
B
Scan area
C
Original (face down)
---
OTM
Top margin (out of scan range)
OLM
Left margin (out of scan range)
Copied Document
D
Copied paper
---
E
Print area
“ 1-7 Printing Area (Margins) ” (p.14)
F
Copy
---
LM, RM
Left margin, Right margin
“ 1-7 Printing Area (Margins) ” (p.14)
TM, BM
Top margin, Bottom margin*
a
a
a
a
Scan / Print direction
A
A
B
B
C
C
D
D
E
E
F
F
Readable Length
Paper Length
Paper
Width
Paper Length
Readable
Width
Readable Length
OTM
OTM
OLM
LM
LM
RM
RM
TM
BM
BM
TM
OLM
Home position
Home position
Standard copy
Borderless copy