2 error indications and fault occurrence causes – Epson Stylus TX100 User Manual
Page 29

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Revision A
TROUBLESHOOTING
Error Indications and Fault Occurrence Causes
29
Confidential
3.2 Error Indications and Fault Occurrence Causes
This chapter describes how the printer indicates an error status with LEDs, and why the error is caused, when a problem happened during each sequence/operation (power-on
sequence, paper feeding, ink drawing, and so on).
Note : --:
No change
Flashing:
Repeats ON and OFF every 1.25 seconds.
High-speed flashing: Repeats ON and OFF every 0.5 second.
Table 3-1. Error Indications and Fault Occurrence Causes
Error Name
LED Indications
Error Cause
Reference
Power
Paper
Ink
Fatal error (scanner)
High-speed
flashing
High-speed
flashing
High-speed
flashing
• RAM trouble occurs.
• System trouble occurs.
Fatal error (printer mechanism)
Flashing
Flashing
Flashing
Mechanical trouble occurs.(CR error, PF error etc.)
Maintenance error (waste ink overflow)
Flashing
ON
ON
The waste ink counter exceeds to capacity.
Paper jam error
--
Flashing
OFF
Paper stays in the paper path after paper ejection.
Paper out error
--
ON
OFF
Failure to load paper to print.
Double feed error
--
Flashing
OFF
Double feed during double sided printing.
Ink out error / No ink cartridge error/
Ink cartridge detection error
--
OFF
ON
• The cartridge has run out of ink.
• The printer could not detect the cartridge.
• The printer detected non-Epson cartridge.
• Writing to/reading from the CSIC could not be made.