Casio MPC-205E - Manual (Page 98)

96
!1 Battery indicator
This indicator always displays the remaining power or estimated
remaining time of the battery pack, etc.
• When using only the battery pack
The estimated remaining time of the battery pack is displayed.
• When using the AC adaptor and the battery pack
The estimated time to reach a full charge is displayed.
• When using only the AC adaptor
“NO BATTERY” appears.
• CALCULATE
“CALCULATE” appears right after the battery
pack is installed. If this message remains to
be displayed, install the battery pack once again, or the replacement
with the new battery pack is required because of the exhaustion of
the battery pack.
!2 Standby Mode
When you click the standby button ( ), this unit enters the Standby
Mode.
• You can also set to the Standby Mode by pressing “
Fn + F3 ( )”,
selecting “Standby” after selecting the “Shut down”, or performing
the operation of “e Settings” described before. If you click this button
when the wake on timer setting is set to on, the unit is restored from
the Standby Mode when the time you set comes.
!3 Hibernation Mode
When you click the hibernation button ( ), this unit enters the
Hibernation Mode.
• You can also set to the Hibernation Mode by pressing “
Fn +
F4
( )”, selecting “Hibernation” after selecting the “Shut down”, or
performing the operation of “e Settings” described before. If you
click this button when the wake on timer setting is set to on, the unit is
restored from the Hibernation Mode when the time you set comes.