Casio MPC-205E - Manual (Page 41)

39
2
Turning on Power the First Time
The first time you turn on the power, you must perform a Windows Me
setup procedure. You need to perform this procedure only once. After
that, Windows Me will boot up automatically when you turn on the power.
The Windows Me setup routine lets you make the settings listed below.
The “Product Key” is sealed on the bottom of this unit. Have it on hand
when performing the setup procedure for the first time.
Performing the Windows Me Setup
When you turn on the power of this unit for the first time, perform the
Windows Me setup procedure.
Important
Do not shut down the power once the Windows Me setup procedure
starts. Also, be sure to power FIVA with its AC adaptor while performing
the setup procedure.
1. Open up FIVA.
2. Slide the power switch (
) to the right.
Though it may take a few moments before anything appears on the
display, you do not need to keep the power switch slided. Simply
press it once and release it.
3. The message below appears after the “Windows Me” screen is shown.
Click Yes immediately to restart FIVA.
Setting
End-user License
Agreement
Product Key
Description
Read and agree to the terms and conditions of the End-
user License Agreement.
Input the correct Windows Me Product Key number.