Casio MPC-205E User Manual
Page 130
128
Connector for communication
(for connection to the dedicated Modular cable)
Connecting to the FIVA
Turn off the power of the FIVA first and then connect as depicted below.
Caution on operation of the product
To use this product, operate as instructed below since this is designed
to be embedded in the FIVA.
1. The product must be set in a case upon use.
2. Do not leave the product in the area such as hot and humid or exposed
to direct sunlight since it is a precision product.
3. Do not spill any liquid such as water on the product.
4. Do not touch electronic terminals without discharging static fully
otherwise it will cause damage.
5. In case the product is used exceeding the maximum specification,
there is possibility that LSIs inside might be damaged permanently.
Therefore, it is favorable to use the product under the normal operation
conditions. If the product is left above the normal operating conditions,
it might be possible to affect to the reliability of the LSIs.
Dedicated Modular cable