Casio MPC-205E - Manual (Page 117)

115
Appendix
When the Windows Me starts up, the Welcome to Windows Me screen
appears.
7. The Windows Me desk top screen appears.
Next, perform the procedure below to change the BIOS setting.
Otherwise, if you start up this unit with the MODE B setting of the
software switch, Windows Me will start up as if the software switch is
set to MODE A.
1. Shut down Windows Me and turn off the power of this unit.
2. Turn on the power of this unit.
3. While the CASIO logo is displayed, press F2 a few times until the
BIOS setup screen appears.
4. Press F9 (SetUp Defaults) and confirm that Yes is selected, then
press Enter .
5. Select Main by pressing .
Select Keyboard by pressing , and then change Japanese to
English by pressing the space key.
6. Press F10 (Save and Exit) and confirm that Yes is selected, then
press Enter .