Casio MPC-205E - Manual (Page 64)

62
To connect microphone
Connect the microphone plug to the microphone port ( ) on the front of
this unit.
Use a microphone which has the monaural mini jack (ø3.5 mm).
Connect the microphone plug to the microphone port ( ).
To disconnect the plug, pull it out from the port by holding the plug.
Connecting to the LAN port
By using the LAN port, you can connect to the standard Ethernet
(10Base-T/100Base-TX). An Ethernet cable is necessary when
connecting to the Ethernet. After connecting, setting the software is
necessary in order to connect to the network using the TCP/IP function.
1. Connect one end of the Ethernet cable to the LAN port on the right
side of the unit and the other end to the network.
MODE B
MODE B
MODE B
MOD E A
MODE A
MOD E A
LA
N
2. After connecting, perform the setting of the software to use the
Ethernet.