Casio CW-L300 - Manual (Page 54)

54
• Selecting the Resize to fit check box enlarges or reduces the image so it fits
within the area specified by Layout. When this option is deselected, the image
is inserted as-is at the location specified by Layout.
• Selecting the Maintain aspect ratio check box causes the width-to-height ratio
of the image to be maintained when it is resized. Note that this option appears
dimmed unless the Resize to fit check box is selected.
• The Full Tape layout can be selected for label printers other than the KL-P1000.
The Full Tape lets you use the all of the tape’s print area to layout an image.
3 Configure the monochrome conversion settings you want.
The explanation uses printing black text on white tape as an example.
• Use the Dithering setting to select the dithering method you want to use. The
following are the available options.
Nearest Color: With this option, light color areas are made white, while dark
color areas are made black. It is best when used for images that
contain line drawings and text only.
Pattern: This option makes light color areas whiter and dark color areas
blacker.
Error Diffusion: This option makes light color areas whiter and dark color areas
blacker, producing an appearance like you get when you
photocopy a color photograph. Printing with this option takes
longer than with Pattern, but results look better.
• Drag the Gamma slider left and right to adjust the relative darkness of an
image.
4 Specify the guideline setting you want.
Selecting the Show Guidelines check box displays guidelines indicating the
specified image size whenever you insert an image into a label.
FAB30_Ver1.02_E_p40-56.p65 04.11.22, 11:44 AM 54