Casio CW-L300 - Manual (Page 47)

47
EL-5000W (EZ-LABEL Printer Tape)
* 1 You can change the Margins and Auto Cut Style settings on the Printer tab.
* 2 If the length of the tape being cut is outside the tape cut range when you perform
a Half Cut/Full Cut or a Full Cut only, the tape length will be longer than the
specified tape length.
• The value you can specify for Tape Width depends on the Label Printer model,
as shown in the table below. The printing width also depends on the printer
model, and cannot be specified by you.
* When printing text only on the KL-E20, the maximum printing width is
approximately 7.5mm.
Margins* 1
Small
Medium
Large
Auto Cut Style* 1
Half Cut/Full Cut
Full Cut only
No Cut
Half Cut/Full Cut
Full Cut only
No Cut
Half Cut/Full Cut
Full Cut only
No Cut
Tape Cut Length* 2
28 to 300 mm
22 to 300 mm
–
35 to 300 mm
29 to 300 mm
–
44 to 300 mm
44 to 300 mm
–
Tape Length
Setting Range
7 to 300 mm
21 to 300 mm
39 to 300 mm
Model
KL-P1000
KL-E20
EL-5000W
(EZ-LABEL
PRINTER
Tape)
EL-5000W
(Memo Tape)
EL-700/CW-L300
KP-C50
KP-C10
Tape Width
6mm / 9mm / 12mm / 18mm
6mm / 9mm / 12mm / 18mm
6mm / 9mm / 12mm / 18mm / 24mm
13mm (Fixed)
6mm / 9mm / 12mm / 18mm / 24mm
13mm (Fixed)
13mm (Fixed)
Maximum
Printing Width
7.5mm
12mm*
16mm
8mm
16mm
8mm
8mm
FAB30_Ver1.02_E_p40-56.p65 04.11.22, 11:44 AM 47