Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 9)

9
>> Connections
Home cinema setup and a home automation system
Use a plasma screen and/or a projector or
connect a home automation system to the
television so you can control room lights and
curtains. For further information about
Home cinema,
see page 33 .
When you have connected a projector or
television screen, it may be necessary to
adjust the sound delay setting to make sure
that picture and sound are in sync. For more
information about the SOUND ADJUSTMENT
menu and sound delay,
see page 26 .
You can integrate your system in a home
automation system to be able to handle a
basic setup with room lights and curtains
by means of the sockets PUC 1-2 A+B.
For a more advanced setup you must use
a Bang & Olufsen Master Link Gateway.
For more information about Master Link
Gateway, contact your retailer.
CTRL
Home
Automation
system
PUC IR/AUTO CONTRAST HDMI OUT
BEOSYSTEM 4
MONITOR CONTROL
BEOSYSTEM 4
PL
6
HDMI OUT IR/AUTO CONTRAST
Home cinema setup with a Bang & Olufsen television screen.
Home cinema setup with a projector. Auto contrast is only available for Bang & Olufsen
television screen.