Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 53)

53
Network settings
You can set up your television to
a network. Bang & Olufsen
recommends that you use a
separate router – a Network Link
router – to ensure the most
reliable playback of digital files.
For more information about
Bang & Olufsen network setup,
contact your Bang & Olufsen
retailer.
For more information about your router,
see the guide enclosed with it. Make a network connection
Connect one end of the Ethernet cable
to the router and the other end to the
Ethernet socket on the system. It is
assumed that you have enabled the
DHCP service on your network.
If LAN settings are set to configure
automatically, IP address, subnet mask,
gateway and DNS server are assigned
automatically. If the settings are set to
configure manually, or if the IP address,
subnet mask, gateway and DNS server,
for some reason, are not assigned
automatically, you must bring up this
information manually.
> Press the green button to be able to
name the LAN connection.* 1
> Press the centre button to store the name
and return to the LAN SETTINGS menu.
> Use the navigation button down to
highlight CONFIGURATION.
> Use the navigation button left or right to
select MANUAL or AUTOMATIC
configuration.
> Press the centre button to store the
setting.
If you have selected MANUAL configuration,
you must enter a value for the IP ADDRESS,
SUBNET MASK, GATEWAY, and DNS. Press
the centre button to store the settings.
1 *You can only use Latin characters for
naming the LAN connection.
INTERNET
ISP
ROUTER
B&O
RECOMMENDED
ROUTER
NAS
BEOSYSTEM 4
INTERNET
ISP
ROUTER
NAS
BEOSYSTEM 4
MENU
SETUP
NETWORK
NETWORK SETTINGS
…
Example of recommended network setup. Example of simple setup.