Bang & Olufsen BeoSystem 4 with Beo4 User Guide User Manual
Page 11
11
>> Connections
Before you connect a computer, you
must disconnect the system, the
computer and all connected equipment
from the mains supply.
Connect a computer
> Using the appropriate type of cable,
connect one end to the DVI or HDMI
output socket on your computer, and the
other end to an HDMI IN socket on the
system.
> If you use the DVI output socket on the
computer, use the appropriate cable and
connect the digital sound output on the
computer to the S/P-DIF IN socket on the
system to hear sound from the computer
in the speakers connected to the system.
> Reconnect the system, the computer, and
all connected equipment to the mains.
Remember, the computer must be
connected to a grounded wall outlet as
specified in its setting-up instructions.
Some computers support operation with a
remote control. To enable remote control
operation of your computer, connect an IR-
transmitter to one of the PUC sockets and
attach it to the IR-receiver of computer.
page 13 for more information on IR-
.
Connect a computer
Connect an analogue source
You can connect one analogue source,
such as a game console or video tape
recorder. To configure connected
equipment to the system,
.
Disconnect all systems from the mains
before you connect additional
equipment.
Connect an analogue source
> Connect the cable to the appropriate
socket on the equipment you wish to
connect.
> Run the cable to the AV IN socket on the
system.
> Reconnect the system and the connected
equipment to the mains.
> To enable remote control operation of the
analogue source, connect an IR-transmitter
to one of the PUC sockets and attach it to
the IR-receiver of the analogue source.
page 13 for more information on IR-
.
> Follow on-screen instructions to configure
the source.
Different adaptors and maybe also cables
are needed. Cables and adaptors are
available from your Bang & Olufsen retailer.