Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 42)

42
Power settings
If you want to make your
television start up faster, you can
set a Quick-Start Timer for one or
two specified time periods. This
will increase the standby power
consumption within these
periods compared to when the
television is in ordinary standby.
On the other hand, you can
choose to save power on other
functions in the television, such
as sound and network.
In the AUTO STANDBY menu,
you can set the television to
switch off automatically after
some time without operation.
Set up the power consumption for
standby, sound and network. The
television can be set to switch itself to
standby after some time without
operation. The factory setting is 4 hours.
This function only applies in video mode,
not in audio mode.
To reduce the start-up time or set up auto
standby, bring up the STANDBY menu.* 1
To make power saving settings for sound,
bring up the SOUND menu.
To make power saving settings for network,
bring up the NETWORK menu.
When AUTO STANDBY is activated, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby if you do not operate it.
When no source signal has been detected
for 15 minutes, the television switches to
standby.
If no Quick-Start Timers are active, it may not
be possible to control the television, lights
and curtains via a home automation system.
1 *If a Quick-Start Timer is active, your television
will switch on within seconds. If you receive
your television signal from a connected set-
top box, the television start-up time is also
affected by the start-up time of the box.
Setting a Quick-Start Timer will increase the
power consumption within the specified period.
Set up the power consumption
MENU
SETUP
POWER SAVING
STANDBY
SOUND
NETWORK
…