Connections – Bang & Olufsen BeoSystem 4 with Beo4 User Guide User Manual
Page 8
8
Connections
The connection panel on your
system allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a television screen, a projector,
a video player, or a Bang &
Olufsen music system.
Any equipment you connect to
these sockets can be registered
in the SOURCE LIST SETUP menu.
For more information,
.
Before you connect any equipment
to your system, remember to
disconnect the system from the
mains. Except when connecting a
source to the HDMI IN or USB socket.
Depending on the type of equipment
you connect to the system, different
cables and maybe also adaptors are
needed. Cables and adaptors are
available from your Bang & Olufsen
retailer.
Loudspeakers
Use Bang & Olufsen BeoLab speakers.
Cables are available from your Bang &
Olufsen retailer.
Equipment with HDMI™ output
Equipment with HDMI output such as a set-
top box can be connected to any available
HDMI socket in the system. For more
information on how to set up connected
equipment for use,
.
A configured source can be selected with
the configured source button or in the
SOURCE LIST. If the television detects an
unconfigured source, you are asked to
choose between doing nothing, showing
the source or configuring it.
Connected equipment can be operated with
its own remote control or you may
download a Peripheral Unit Controller (PUC)
table, if available, to use a Bang & Olufsen
remote control,
BEOSYSTEM 4
AERIAL
SATELLITE
PL 1–6
If you need to reset your television to default
settings, then bring up the REGIONAL
SETTINGS menu and select another country.
You will be asked to confirm the reset. All
settings will be deleted and you must go
through first-time setup, follow on-screen
instructions.
PL 1–6
MONITOR