Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 10)

10
>> Connections
Connect digital sources
Connect up to five external HDMI
sources, such as a set-top box, computer
or game console. All equipment
connected to the system can be
configured,
see page 16 .
Depending on the type of equipment you
connect to the system, different cables and
maybe also adaptors are needed. If you have
more than two types of equipment that
need a PUC socket, you must buy an extra
PUC cable. Cables and adaptors are available
from your Bang & Olufsen retailer.
Connect a set-top box
> Connect the cable to the appropriate
socket on the set-top box.
> Run the cable to an HDMI IN socket on the
system.
> To enable remote control operation of the
set-top box, connect an IR-transmitter to
one of the PUC sockets and attach it to
the IR-receiver of the set-top box.
See
page 13 for more information on IR-
transmitters .
> Follow on-screen instructions to configure
the source.
Connect a DVD/Blu-ray player
> Connect the cable to the appropriate
socket on the DVD/Blu-ray player.
> Run the cable to an HDMI IN socket on the
system.
> To enable remote control operation of the
DVD/Blu-ray player, connect an IR-
transmitter to one of the PUC sockets and
attach it to the IR-receiver of the DVD/Blu-
ray player.
See page 13 for more
information on IR-transmitters .
> Follow on-screen instructions to configure
the source.
Connect a game console
> Connect the cable to the appropriate
socket on the game console.
> Run the cable to an HDMI IN socket on the
system.
> To enable remote control operation of the
game console, connect an IR-transmitter
to one of the PUC sockets and attach it to
the IR-receiver of the game console.
See
page 13 for more information on IR-
transmitters .
> Follow on-screen instructions to configure
the source.
Connect a camera
> Connect the cable to the appropriate
socket on the camera.
> Run the cable to an HDMI IN socket on the
system.
> Follow on-screen instructions to configure
the source.
CTRL 1 CTRL 2 CTRL 3
PUC 3 A+B PL 1 PL 2 PL 3
EXT IR PUC 1
A+B
CTRL 4
PUC 2
A+B
CTRL 5
NOT
USED
PL 4 PL 5
1 2 3 4 5
HDMI IN
AV
IN
S/P-DIF
IN
5V
0,5A
12V=1.0A
STAND COMMON INTERFACE
CHIPSIDE
CHIPSIDE
5V=50mA
AERIAL
14/18V=0.4A
SATELLITE
HDMI
OUT
MONITOR
CONTROL
IR/AUTO
CONTRAST
PL 6
Example of connected digital sources.
Set-top box
DVD/Blu-ray player
Computer Game console
Camera