Software and service update – Bang & Olufsen BeoSystem 4 with Beo4 User Guide User Manual
Page 46
46
We recommend that you enable
automatic software update on
your television to ensure that
your television always has the
latest features and functions.
If your television is set up in a
system with the BeoLink
Converter NL/ML it is essential
that you enable the automatic
system update to ensure that all
products in your system are kept
up to date and are able to
communicate.
You can always look up software
information and update the TV
software manually.
Software and service update
You can look up information about the
current software version, its release
date, and any release notes available.
See software information
Update software
To download available software updates,
your television must be connected to
the Internet. It is recommended that you
set the television to update software
automatically.
You can also download available
software updates from
onto a USB
device. Connect the USB device to the
USB port on the connection panel.
On some markets, it is also possible to
update the software via the antenna
signal (OAD). When you update via the
antenna signal, some updates are
required and not possible to cancel.
Contact your retailer for more
information about software updates
While the television is updating with new
software, the standby indicator flashes red
and the television should remain connected
to the mains.
System update …
If you have a system setup with a
BeoLink Converter NL/ML and several
Bang & Olufsen products, you should
enable software update of the entire
system in the television menu. Available
software updates for all the Bang &
Olufsen products in your setup will then
be downloaded automatically on a
regular basis.
When the system update feature is enabled,
you cannot disable software updates on the
individual products.
MENU
SETUP
SERVICE
LATEST RELEASE
MENU
SETUP
SERVICE
SOFTWARE UPDATE
CHECK FOR UPDATE
AUTOMATIC DOWNLOAD