beautypg.com

Adjust sound and picture settings, 26, Adjust sound and picture settings – Bang & Olufsen BeoSystem 4 with Beo4 User Guide User Manual

Page 26

background image

26

Adjust sound and picture settings

Sound and picture settings are

preset from the factory to neutral

values which suit most types of

programmes. However, if you

wish, you can adjust these
settings to your liking.

Adjust sound settings such as
volume, bass and treble and

enable eco mode. Picture

settings include, for example,

contrast, brightness, colour, and

viewing distance.

Change your sound and picture
settings temporarily – until your
television is switched off – or
store them permanently.

Activate different picture modes,
for example, game mode if you

connect a game console to your

television.

For information about how to
change the picture format, see

Getting Started.

Some picture functions are not available
for non-Bang & Olufsen screens and

projectors.

Adjust sound settings

Adjust sound settings via the SOUND

menu. Temporary settings are cancelled
when you switch off the television.

If you choose to enable eco mode, all
speakers in a speaker group that do not
receive a signal will switch off and save
power.

In the AUDIO DESCRIPTION menu, you can
set the television to describe what happens
on the television screen by means of sound.
Remember to enable the VISUALLY
IMPAIRED menu field in the LANGUAGES
menu under REGIONAL SETTINGS.

In the SOUND DELAY menu, you can set a
sound delay for a connected television
screen or projector, that has not been
identified automatically by the system, to
make sure picture and sound are in sync.

Adjust picture settings

Adjust the picture settings via the

PICTURE menu. Temporary settings are
cancelled when you switch off the
television.

To temporarily remove the picture from the

screen, press LIST and use the navigation
button up or down to bring up P.MUTE in
the Beo4 display and press the centre
button. To restore the picture, press a
source button. (Beo6: press to bring up
the Scene display on Beo6, press Picture,
then press P.Mute. To restore the picture,
press P.Mute again).

 

MENU

   

 SETUP   
PICTURE   
PICTURE ADJUSTMENT   

 

 

MENU

    

 SETUP   
SOUND   
SOUND ADJUSTMENT   

 

 

This manual is related to the following products: